Distributors, lighting contractors and landscape project managers evaluating an outdoor lighting supplier usually need answers to the same handful of questions: which IP rating is actually required, how much wattage per fixture, whether solar or wired fits the site, and what MOQ, lead time and warranty terms to expect. This guide walks through those decision points with concrete specifications drawn from OKELI Lighting's current outdoor product range.
Why buyers get stuck on outdoor landscape lighting procurement
Outdoor fixtures live in a harsher environment than indoor products. Water ingress, corrosion, beam spread and driver failure are the four problems that generate most after-sales complaints — and most of them trace back to decisions made before the order was placed: material choice, ingress protection level, and whether the supplier controls its own manufacturing chain. A supplier that cannot state fixture-level specifications clearly is also unlikely to control quality consistently.
OKELI Lighting is an ISO9001 certified manufacturer established in 2009, operating a facility of over 35,000 m² with a complete manufacturing chain from raw material to finished product, and a production capacity that supports around 1 million USD in sales per month. Most products carry ETL/CE/CB/ROHS/BIS certification. The company also supplies OEM programs for major retail chains, including a verified OEM partnership with Home Depot since 2019 and supply of smart-home categories for Lowe's.
Decision point 1: IP rating — match the rating to the actual location
The most common specification mistake in outdoor lighting procurement is over- or under-specifying ingress protection. Use this mapping:
| Location | Recommended protection | What to look for |
|---|---|---|
| Sheltered wall sconces, entrance lighting | IP54 | Die-cast aluminum body; e.g. OKELI's 18W LED outdoor wall light, IP54, 3000K |
| Garden paths, walkways, facades exposed to rain | IP65 | Stainless steel or aluminum; e.g. 6W IP65 garden path bollard light, 30cm solar pathway light |
| Ground-level spotlights, in-ground uplights, deck lighting | IP67 | Tempered glass and 316 stainless steel frames for inground fixtures; drive-over resistance matters in plazas and driveways |
| Ponds, pools, underwater features | IP68 | Submersible construction; e.g. OKELI's 12W IP68 submersible spotlight, RGB+white, stainless steel bezel |
One practical note for B2B buyers: IP ratings describe protection against dust and water at the time of manufacture. Confirm with the supplier how the rating is tested and whether it applies to the complete fixture including cable glands — not just the lens.
Decision point 2: Wired or solar?
Both fit the same landscape, but the right choice depends on wiring cost and site conditions:
- Solar fixtures avoid trenching and cabling cost, which makes them attractive for hospitality grounds, estates and rental properties. OKELI offers 304 stainless steel solar pathway lights (30cm, 3000K warm white or 6500K cool white, IP67, 8–10h auto runtime) and a 15W-equivalent solar garden spotlight with automatic dusk-to-dawn operation and spike mount.
- Wired fixtures deliver consistent output regardless of weather and are the standard for commercial landscapes, plazas and building facades. A 304 stainless steel bollard path light (40cm 3W or 60cm 5W, IP67, dusk-to-dawn) suits driveways and walkways where a fixed cable run is acceptable.
If the project already has a low-voltage cable infrastructure, wired fixtures usually win on output stability. If the site is a retrofit with no trenching budget, solar is the practical option — but confirm with the supplier the realistic nightly runtime for your latitude, not just the advertised maximum.
Decision point 3: Wattage, beam angle and lumens for landscape spotlights
Landscape spotlights are the workhorse of accent lighting, and OKELI's range is built around adjustable 15°–60° beams in die-cast aluminum:
| Model | Power | Output | Typical use |
|---|---|---|---|
| LED landscape spotlight | 10W | 800lm | Small shrubs, sign accenting, residential beds |
| LED landscape spotlight | 20W | 1600lm | Medium trees, facades, residential and commercial |
| LED landscape spotlight | 50W | 4000lm | Large trees, commercial grade landscape features |
The adjustable 15°–60° beam lets one fixture family cover narrow tree trunks (tight beam) and wide facade washing (wide beam), which simplifies inventory for distributors — fewer SKUs cover more project types. All are IP67 die-cast aluminum. For facade and perimeter lighting, the 24W linear wall washer (1800mm, RGB+white, IP65) and 30W flood light (2700lm, 120° beam, IP65) extend the range to architectural applications, and a 100W high-mast flood light (9000lm, IP66) covers sports fields and large areas.
Decision point 4: Material and corrosion resistance
Coastal and poolside projects fail early when suppliers substitute painted steel for stainless. In OKELI's outdoor range:
- Landscape spotlights and flood lights use die-cast aluminum bodies for heat dissipation and impact resistance.
- Path lights, bollards and the IP68 submersible spotlight use 304 stainless steel; the inground uplight frame goes further to 316 stainless steel with tempered glass, appropriate for plazas and driveways.
- String lights use UV-resistant PVC cabling, IP65, available in 3000K warm white and 6500K cool white, 100 LEDs over 10m.
For seaside installations, ask the supplier specifically which grades are used for fasteners and internal components — the visible body material is only part of the corrosion picture.
Decision point 5: Evaluating the supplier, not just the fixture
Before comparing quotations, put these questions to any candidate supplier — including us:
- Certification scope: which standards apply to which product families? OKELI's products are mostly ETL/CE/CB/ROHS/BIS certified, but certification should always be confirmed per product family and destination market.
- Manufacturing control: is the supplier a manufacturer or a trading company? OKELI runs a complete manufacturing chain from raw material to finished product at a 35,000+ m² facility, with an in-house R&D team.
- Volume capability: can the factory sustain your reorders? OKELI's production supports approximately 1 million USD in sales per month.
- OEM track record: has the supplier passed retail-chain audits? OKELI has been a verified OEM partner of Home Depot since 2019 and supplies the smart-home category for Lowe's.
Where each fixture type fits — application map
| Application | Suggested OKELI fixtures |
|---|---|
| Residential driveway & walkway | 6W IP65 garden path bollard light, 60cm stainless bollard, solar pathway light (warm white) |
| Tree & facade accenting | 10W / 20W / 50W adjustable spotlights |
| Building facade & perimeter | 24W linear wall washer, 30W flood light, 18W wall sconce |
| Water features & pools | 12W IP68 submersible spotlight |
| Plaza & driveway uplighting | 9W IP67 inground uplight (316 stainless), 3W recessed step/deck light |
| Seasonal & hospitality decor | warm white and cool white string lights, Christmas string lights |
| Sports fields & large areas | 100W high-mast flood light |
Frequently asked questions
What is the warranty?
OKELI offers a 3-year warranty. For any quality problem, compensation is offered pcs-to-pcs, or replacement drivers/chips shipped with the next order.
What is the delivery time?
Some hot-sale items are in stock. Sample and trial orders take about 7–10 days; bulk orders normally take 40–45 days of production.
What is the MOQ for customized packaging?
At 3,000 pcs per item, custom color boxes and logos are available. Below 3,000 pcs, orders ship in white boxes or the factory's standard color box.
What are the payment terms?
T/T, L/C and other terms — contact us to discuss options for your order size.
Can we get samples before ordering?
Yes, samples are available before ordering.
Do you support OEM/ODM?
Yes. OKELI is a one-stop OEM/ODM lighting supplier, and wholesale export is a core part of the business, serving retailers and project managers worldwide.
Next step
If you are comparing suppliers for a landscape, facade or hospitality lighting program, the fastest path is to send your project requirements — fixture types, target market certification, estimated annual quantities and any packaging needs — and request a specification sheet and sample for the relevant models above. A supplier who answers those four questions in writing, with fixture-level IP ratings, materials, certification scope and lead times, is ready to be taken seriously.