100W LED High Mast Flood Light, IP66 Die-Cast Aluminum, 9000lm, Sports Field & Large Area Lighting
Highlights
- 100W / 9,000 lm — replaces a 400W metal halide at 90 lm/W, same illuminance at a fraction of the energy
- Asymmetric 90°×60° beam — pushes light across the playing surface, limits spill and neighbour complaints
- IP66 rated — withstands high-pressure jet washing, suitable for coastal and high-rainfall environments
- Five-bolt yoke mount with ±90° tilt — fits standard sports poles and industrial mast heads without adapters
- 50,000-hour LED lifespan — no re-lamping for the duration of most facility management contracts
Product Detail
High-Output Area Lighting for Sports, Industrial & Large Commercial Sitesites
100W LED High Mast Flood Light — IP66, Die-Cast Aluminum, 9,000 lm, Sports & Large AreaArea
You need high-output light for a big area. Pole height is 8–15m. Old metal halide fittings are heavy and need maintenance. This 100W LED flood gives 9,000 lm. It replaces a 400W metal halide. Efficacy is 90 lm/W. Housing is die-cast aluminum. IP66 rating. Beam is symmetric 90°×60° asymmetric. It spreads light across the field. Spill outside the boundary is small. 220V direct operation. Driver is built in. Five-bolt yoke mount fits poles. Output per unit is consistent. OEM batch supply is available.
100WPower Draw
9,000 lmLuminous Flux
90 lm/WEfficacy
IP66Ingress Protection
50,000 hLED Lifespan
220VDirect Input
Why Buyers Choose This High Mast Flood
9,000 lm — Metal Halide Replacement at Lower Running Cost
9,000 lm at 100W replaces a 400W metal halide. Illuminance is similar. Energy draw is much lower. Sports clubs and municipalities swap old halide fixtures. Running cost goes down. No change to mounting positions or electrical supply.
9,000 lm / 400W MH Equivalent
Asymmetric 90°×60° Beam — Field-Optimised Distribution
Asymmetric beam pushes light across the playing surface. Spill beyond the field boundary is limited. Neighbour light-pollution complaints drop. Illuminance stays inside the play area.
Asymmetric Beam
IP66 — High-Pressure Wash Resistant
IP66 means full dust exclusion. It also resists powerful water jets. Fixtures can be cleaned with a pressure washer from the ground. Works in coastal and high-rainfall environments.
IP66 Rated
Die-Cast Aluminum — Mast-Life Durability
Housing matches the service life of the mast. Die-cast aluminum with powder-coat finish. Handles UV, wind vibration, and thermal cycling. No housing degradation like polymer-bodied floods in 5–7 years.
Die-Cast Aluminum
Five-Bolt Yoke Mount — Standard Mast Compatibility
Yoke mount fits standard sports lighting poles and industrial mast heads. ±90° tilt adjustment locks the beam angle. No custom mounting hardware for standard installations.
Universal Yoke Mount
OEM & Bulk Project Supplypply
Custom wattage from 50W to 400W. Colour temperature options: 4000K, 5000K, 6500K. Beam pattern and private-label packaging available. Suitable for sports facility contractors, municipal procurement, and electrical distributors with regular large-site orders.
OEM / Project Quantities
Full Technical Specifications
Housing Material | Die-Cast Aluminum with Powder-Coat Finish |
|---|---|
LED Power | 100W |
Luminous Flux | 9,000 lm |
Efficacy | ~90 lm/W |
Colour Temperature | 5000K Daylight (4000K available) |
Beam Angle | Asymmetric 90°×60° |
Ingress Protection | IP66 |
Operating Voltage | 220V AC |
Driver | Integrated |
Mounting | Five-bolt yoke (±90° tilt) |
Rated LED Lifespan | 50,000 hours |
Warranty | 3 years |
Custom Options | Wattage, CCT, beam angle, finish, packaging — available upon request |
Typical Installation Environments
Football & multi-use sports pitchesches Mast-mounted field lighting for training and recreational play
Tennis & athletics facilitiesties Court and track perimeter lighting from 8–12m poles
Industrial yards & logistics parksarks Outdoor storage area and loading dock illumination
Large car parks & bus depotspots High-mast area lighting for safety and CCTV coverage
Construction sites Temporary or permanent high-output lighting from existing site poles
Request a Quote or Sample
Tell us your pole height, field dimensions, and required lux level. We confirm unit count, beam angle selection, pricing, and lead time within one business day.
Tags
Related Products
