LED Outdoor Wall Light, 18W IP54 Die-Cast Aluminum, 3000K, Entrance & Architectural Wall Sconce
Highlights
- 18W / 1,440 lm with downward optics — lights 2–3m entrance approach zone below the fixture
- Die-cast aluminum with black powder-coat — architectural profile that works as a design piece on the facade
- IP54 splash-rated — right for sheltered exterior walls, covered entrances and colonnade corridors
- 50,000-hour LED lifespan — decade-scale service life with no re-lamping on commercial facade runs
- 220V direct with integrated driver — back plate covers junction box, standard install for any electrician
Product Detail
Outdoor Wall Light — Entrance, Corridor & Architectural Sconceonce
18W LED Outdoor Wall Light — IP54, Die-Cast Aluminum, 3000K, Entrance & Architectural Sconceonce
Outdoor wall lights do two jobs. They light the surface and the ground below. They also show as a design piece on the building, day and night. A cheap-looking wall light hurts the building look. This 18W die-cast aluminum sconce handles both tasks. It gives 1,440 lm with downward light for entrance approach. It has a clean architectural shape in black powder-coat. That finish works on modern and transitional building exteriors. IP54 rating for exposed wall spots. Integrated 220V driver — wire direct to wall junction box. No extra gear needed. Specify for a row of same units across a facade or corridor. OEM and project batch supply is available.
18WPower Draw
1,440 lmLuminous Flux
IP54Ingress Protection
3000KColour Temp
Die-Cast Al.Housing
50,000 hLED Lifespan
Why Buyers Choose This Wall Light
1,440 lm Downward Distribution — Entrance Approach Lighting
1,440 lm with downward optics lights the 2–3m approach zone below the fixture. Good for building entrances, covered walkway corridors, car park stair exits. Also for any wall spot where main job is approach and safety light, not decorative look.
1,440 lm / Downward
Architectural Profile — Right on Facade by Day
Die-cast aluminum housing. Clean geometric shape. Black powder-coat finish. Not a utility fitting that hides in the wall. It is a visible design piece that is part of the facade. Architects and interior designers specify it for modern homes, small hotels, and commercial building exteriors.
Architectural Profile
Die-Cast Aluminum — Outdoor Service Life
Pressure die-cast aluminum resists UV fading, salt-air corrosion, and thermal cycling. The powder-coat finish does not chalk or peel in a normal building service cycle. Right for coastal homes, tropical resorts, and high-humidity commercial exterior walls.
Die-Cast Aluminum
IP54 — Sheltered Exterior Position
IP54 covers dust resistance and splash water from any direction. Right for sheltered exterior wall spots — covered entrances, colonnade walls, building facade niches. Direct rain is limited there. But ambient moisture, condensation, and occasional splash are present.
IP54 Splash-Rated
220V Direct — Integrated Driver
Direct 220V wall junction box connection. No external driver box to mount or hide. The back plate covers the junction box. Driver sits inside. Standard install for any licensed electrician. No special outdoor lighting knowledge needed.
220V / Integrated Driver
Project Batch & OEM Supplypply
Custom wattage (10W–30W). Color temperature (2700K, 4000K). Finish color (RAL on request). Private-label packaging. Consistent profile and output across the batch. This is key for facade runs where next fixtures must match visually. Good for property developers, hotel buyers, and architectural lighting suppliers.
OEM / Project Batch
Full Technical Specifications
Housing Material | Die-Cast Aluminum with Powder-Coat Finish (Black standard) |
|---|---|
LED Power | 18W |
Luminous Flux | 1,440 lm |
Colour Temperature | 3000K Warm White (2700K / 4000K available) |
Beam Distribution | Downward-directed |
Ingress Protection | IP54 |
Operating Voltage | 220V AC |
Driver | Integrated |
Mounting | Wall surface mount (back plate covers standard junction box) |
Rated LED Lifespan | 50,000 hours |
Warranty | 3 years |
Custom Options | Wattage, CCT, RAL finish, private label — available upon request |
Typical Installation Environments
Residential villa & estate entrancesnces — gate pillar wall lights, garage approach, front door flanking sconces
Boutique hotel & resort corridorsdors — covered walkway wall lighting, room entrance approach, pool changing room exteriors
Retail & commercial building facadesades — entrance canopy wall lighting, colonnade corridor sconces, stairwell exit walls
Office & mixed-use developmentsents — facade wall sconces matching the building exterior style
F&B & outdoor diningr dining — covered terrace perimeter wall lighting, bar and restaurant exterior approach
Request a Quote or Sample
Tell us your wall position, mounting height, and finish preference. We will confirm pricing, MOQ, and lead time within one business day.
Tags
Related Products
